Home / Guides / KATO vs TOMIX

KATO vs TOMIX

The two Japanese N gauge makers covered on this site, compared only on what each states on its own official pages, plus how the same real trains are split into boxes in our database. No ratings: which is "better" depends on the train and the track you already have.

Quick answer. Both are 1/150 (Shinkansen 1/160) on 9 mm track, and each says other makers' N gauge trains run on its track. The track systems differ in size: KATO Unitrack is based on a 248 mm straight with 33 mm double-track spacing; TOMIX Fine Track on a 140 mm straight with 37 mm spacing. Each maker sells a joint piece for other makers' track. TOMIX says its TN couplers do not couple with other makers' cars. KATO labels many sets "DCC Friendly"; TOMIX says its products do not support DCC. Each maker splits the same train into different boxes, so match add-on sets by product number within one maker.

Are KATO and TOMIX track compatible?

Only through an adapter piece. KATO's joint track 20-045 connects Unitrack to other makers' roadbed track up to 19 mm wide (Fine Track is 18.5 mm wide), and TOMIX sells the joint rail S35-J(F) (1529) and its concrete-tie version S35-J-PC(F) (1530) for connecting other makers' track. Beyond the joint, the pieces do not line up: lengths, radii and double-track spacing all differ.

KATO UnitrackTOMIX Fine Track
Standard straight248 mm (all lengths based on it)140 mm (S140), about one car length
Base curve radiusR315 (starter and M sets)C280 (starter sets and Rail Pattern A)
Double-track spacing33 mm37 mm
Roadbed widthNot stated on the pages we checked18.5 mm
PowerDC 12 V, two-railPower units set at 12 V
Starter ovalM1 set equivalent (20-852)Rail Pattern A
Joining the other systemJoint track 62 mm (20-045) for other makers' roadbed track up to 19 mm wideJoint rail S35-J(F) (1529): connects to other makers' rails by swapping the joint

Sources: KATO Unitrack site, KATO straight track (20-045), TOMIX rail guide, TOMIX 1529, TOMYTEC FAQ. Details: KATO Unitrack guide, Fine Track basics.

How do couplers, DCC and power compare?

KATOTOMIX
CouplersProduct pages name the coupler per set, for example "KATO coupler, close-coupler type" (KATOカプラー密連形) or body-mounted close couplers on recent trains; some sets use Arnold couplers (e.g. 10-025, 10-2026). sourceMainly three types: Arnold (also used by other makers), TOMIX TN couplers, and conductive couplers (Shinkansen). TOMIX: TN couplers are not compatible with other makers, and coupling with other makers' cars is in principle not possible except some freight cars. source
DCCMany KATO sets are labelled "DCC Friendly" (DCCフレンドリー), e.g. the N700S and E5 pages. sourceTOMIX states that its products do not support DCC. source
Other makers' trains on the trackKATO: N gauge trains of KATO and other makers worldwide can run on Unitrack. sourceTOMIX: N gauge vehicles can run on TOMIX track, except some such as die-cast models. source
Controller outputPower Pack Standard SX: rated 1.2 A. sourceTCS Power Unit N-600: DC 1 A; N-1001-CL: DC 1.2 A. TOMIX: a TOMIX controller can run other makers' trains and the other way round. source
AC adapter outside JapanN AC adapter 22-082 (sold separately): input AC 100-240 V, type A plug. The starter-set adapter's input is not stated. sourceAdapter-type power units can be used in 100-240 V countries; a plug adapter may be needed. source
Starter setsStarter sets (スターターセット): train + M1-equivalent oval (R315) + Power Pack Standard SX. sourceBasic Set SD (ベーシックセットSD): train + Rail Pattern A oval (C280) + power unit. source

Neither maker's pages that we checked name the other company. TOMIX speaks of "other makers" (他社) in its FAQ. Whether a particular KATO car couples to a particular TOMIX car is therefore not confirmed by either maker, and we do not say it does.

Can KATO and TOMIX cars be coupled together?

Not as a rule. TOMIX says coupling with other makers' cars is in principle not possible, except some freight cars, and that TN couplers are not compatible with other makers. Arnold couplers are the shared type: TOMIX calls them a worldwide standard and sells the adapter JC19 to fit Arnold couplers to tight-lock automatic TN cars. Types and part numbers: N scale couplers.

Can I use a KATO power pack with TOMIX trains?

The makers answer differently. TOMIX: a TOMIX controller can run other makers' trains and another maker's controller can run TOMIX trains, but TOMIX units are set at 12 V, and a controller that can output more than DC 12 V may damage TOMIX motors and boards if turned up too far. KATO: power packs and track "basically only work in combination from the same maker", while other makers' trains run without problems. See power packs.

Is KATO or TOMIX cheaper?

It depends on the train: per car, KATO's full train is cheaper in 6 of the 10 trains that both makers currently sell in our database, and TOMIX's in 4. The car counts can differ between makers, so compare the price per car as well as the total. All figures are the makers' list prices in Japan including tax (2026-10-11), added up from the boxes that make the full train.

TrainKATO full trainTOMIX full trainPer car (KATO / TOMIX)Basic set (KATO / TOMIX)
N700S Shinkansen¥47,960
16 cars, 3 boxes
¥49,170
16 cars, 3 boxes
¥2,998 / ¥3,073¥15,840 / ¥13,860
E5 Series Shinkansen "Hayabusa"¥35,310
10 cars, 3 boxes
¥33,990
10 cars, 3 boxes
¥3,531 / ¥3,399¥12,210 / ¥15,070
E235 Series 1000 (Yokosuka / Sobu Rapid Line)¥40,370
11 cars, 3 boxes
¥43,670
11 cars, 2 boxes
¥3,670 / ¥3,970¥17,490 / ¥19,800
500 Series Shinkansen "Nozomi"¥51,810
16 cars, 2 boxes
¥46,970
16 cars, 3 boxes
¥3,238 / ¥2,936¥28,600 / ¥12,980
Type 923 "Doctor Yellow"¥29,920
7 cars, 2 boxes
¥22,000
7 cars, 2 boxes
¥4,274 / ¥3,143¥15,620 / ¥13,750
E7 / W7 Series Shinkansen¥40,150
12 cars, 3 boxes
¥44,660
12 cars, 3 boxes
¥3,346 / ¥3,722¥13,200 / ¥16,720
E6 Series Shinkansen "Komachi"¥24,860
7 cars, 2 boxes
¥27,390
7 cars, 2 boxes
¥3,551 / ¥3,913¥12,760 / ¥13,420
N700A Shinkansen (N700 Series 1000)¥39,050
16 cars, 3 boxes
¥55,000
16 cars, 3 boxes
¥2,441 / ¥3,438¥14,300 / ¥16,940
H5 Series Shinkansen "Hayabusa"¥36,300
10 cars, 2 boxes
¥35,420
10 cars, 2 boxes
¥3,630 / ¥3,542¥23,540 / ¥18,040
E235 Series Yamanote Line (0 subseries)¥32,010
11 cars, 3 boxes
¥40,040
11 cars, 3 boxes
¥2,910 / ¥3,640¥13,860 / ¥17,820

Train, track and controller in one box, for the same train:

The boxes are not identical: KATO's oval is larger (R315, 1337 x 677 mm) than TOMIX's (C280, 1120 x 560 mm), and the controllers differ (Power Pack Standard SX 1.2 A vs PU-N600).

Prices are the makers' list prices in Japan, including consumption tax, as shown on the official page or list on 2026-10-11. "Planned" is a provisional price for an upcoming run. Prices can change; check the current price on the official page. Shop prices and stock are not shown. Per-car figures are the full-train total divided by the number of cars, rounded. Shops in and outside Japan may sell below or above these prices.

Which starter oval is smaller?

TOMIX's. TOMIX gives its Rail Pattern A oval (C280 curves) as 1120 x 560 mm; KATO gives its starter-set oval (R315 curves) as 1337 x 677 mm. Both say it fits in about one tatami mat. More plans: N scale layout sizes.

Which is easier to get outside Japan?

Neither maker's Japanese trains are sold by the maker directly abroad. KATO's US subsidiary, KATO USA, sells North American trains and Unitrack; we found no Japanese trains in its store (KATO USA vs KATO Japan). TOMYTEC says it does not sell directly; its official shop list has 26 overseas entries (China, Hong Kong, Taiwan, Korea, Australia, Germany and the USA, checked 2026-10-11), and TOMIX's Fine Track manual limits customer support to products bought in Japan and enquiries from Japan.

Are the same trains split the same way?

For every train in our database that both makers currently sell, the boxes needed for the full train (cars per box in brackets) and the boxes that contain a motor car. Taken from the makers' formation diagrams and product pages.

TrainKATO boxesKATO motor inTOMIX boxesTOMIX motor in
N700S Shinkansen
16 cars (KATO) / 16 cars (TOMIX)
3: 10-1697S (4), 10-1698 (4), 10-1699 (8)10-1697S3: 98424 (4), 98425 (4), 98426 (8)98424, 98426
E5 Series Shinkansen "Hayabusa"
10 cars (KATO) / 10 cars (TOMIX)
3: 10-1969 (3), 10-1970 (3), 10-1971 (4)10-19693: 98497 (4), 98498 (3), 98499 (3)98497
E235 Series 1000 (Yokosuka / Sobu Rapid Line)
11 cars (KATO) / 11 cars (TOMIX)
3: 10-1702S (4), 10-1703 (4), 10-1704 (3)10-1702S2: 97205 (4), 97207 (7)97205
500 Series Shinkansen "Nozomi"
16 cars (KATO) / 16 cars (TOMIX)
2: 10-1794 (8), 10-1795 (8)10-17943: 98363 (4), 98364 (4), 98365 (8)98363, 98365
Type 923 "Doctor Yellow"
7 cars (KATO) / 7 cars (TOMIX)
2: 10-896S (3), 10-897 (4)10-896S2: 98480 (4), 98481 (3)98480
E7 / W7 Series Shinkansen
12 cars (KATO) / 12 cars (TOMIX)
3: 10-1980 (3), 10-1981 (3), 10-1982 (6)10-19803: 98530 (4), 98531 (4), 98532 (4)98530, 98532
E6 Series Shinkansen "Komachi"
7 cars (KATO) / 7 cars (TOMIX)
2: 10-1973 (3), 10-1974 (4)10-19732: 98500 (3), 98501 (4)98500
N700A Shinkansen (N700 Series 1000)
16 cars (KATO) / 16 cars (TOMIX)
3: 10-1174 (4), 10-1175 (4), 10-1176 (8)10-11743: 98573 (4), 98574 (4), 98575 (8)98573, 98575
H5 Series Shinkansen "Hayabusa"
10 cars (KATO) / 10 cars (TOMIX)
2: 10-1967 (6), 10-1968 (4)10-19672: 98570 (4), 98571 (6)98570
E235 Series Yamanote Line (0 subseries)
11 cars (KATO) / 11 cars (TOMIX)
3: 10-1468S (4), 10-1469 (4), 10-1470 (3)10-1468S3: 98525 (4), 98526 (4), 98527 (3)98525

In several TOMIX trains a second motor car sits in an add-on set, while in the KATO trains listed here the motor is in the basic set only. Set letters (A, B) also cover different cars between makers; the series pages show the split car by car.

Which should I choose, KATO or TOMIX?

The makers' facts point to practical questions rather than a winner:

  • Track you already have. Unitrack and Fine Track have different lengths, radii and double-track spacing. Each maker sells a joint piece for connecting other track (KATO 20-045, TOMIX 1529).
  • The train and edition you want. Check which maker makes it and when it is next scheduled on the release tracker.
  • Mixing trains. Both makers say other makers' trains can run on their track; coupling between makers' cars is not supported by TOMIX except some freight cars.
  • DCC. KATO marks DCC-friendly sets; TOMIX does not support DCC (DCC guide).
  • Price. Neither maker is cheaper across the board; compare the train you want in the price table.

Common questions

Are KATO and TOMIX track compatible?

Not directly, but each maker sells an adapter piece. KATO's joint track 20-045 connects Unitrack to other makers' roadbed track up to 19 mm wide, and TOMIX sells the joint rail S35-J(F) (1529). The two systems still differ in length (248 mm vs 140 mm base straight), base radius (R315 vs C280) and double-track spacing (33 mm vs 37 mm).

Can KATO and TOMIX cars be coupled together?

Not as a rule. TOMIX says coupling its cars with other makers' cars is in principle not possible, except some freight cars, and that its TN couplers are not compatible with other makers.

Can a KATO train run on TOMIX track?

TOMIX says N gauge trains of other makers can run on TOMIX track, except some such as die-cast models, and KATO says N gauge trains of KATO and other makers run on Unitrack.

Can I use a KATO power pack with TOMIX trains?

TOMIX's FAQ says a TOMIX controller can run other makers' trains and the other way round, but warns that controllers able to output more than DC 12 V can damage TOMIX cars if turned up too far. KATO's FAQ says power packs and track basically only work as a same-maker pair.

Is KATO or TOMIX cheaper?

It depends on the train. Comparing the makers' own list prices in Japan for the full train, KATO is cheaper per car in 6 of the 10 trains that both make in our database and TOMIX in the other 4 (prices checked 2026-10-11). The table on this page shows each train.

Are KATO and TOMIX the same scale?

Yes. Both state that Japanese N gauge is 1/150 on 9 mm track and that Shinkansen are 1/160.

See also: KATO N scale hub · TOMIX N scale hub · Japanese model trains guide

Only facts stated on KATO's and TOMIX's official pages (checked 2026-10-11; coupler, power, scale, layout and overseas facts checked 2026-10-11, including KATO's power pack FAQ, TOMIX's shop list and the Fine Track manual) are used. Rail Set Atlas is not affiliated with either maker and has not tested running quality.