Do KATO and TOMIX support DCC?
| KATO | TOMIX | |
|---|---|---|
| DCC support | Yes; many sets labelled "DCC Friendly" (DCCフレンドリー), e.g. the N700S page | No: "TOMIX products do not support the DCC system" |
| Standard | International NMRA standard | - |
| Starter system | D103 DCC basic set (KATO's recommendation) | - |
| Track | Unitrack works with DCC (KATO USA) | - |
What does "DCC Friendly" mean?
A KATO car that takes a decoder in one step, without soldering or modification. KATO's FAQ says there are separate friendly decoders for the motor car (controls the motor), the cab car (controls the lights) and interior lights, and that "DCC Friendly" cannot be used in cars of other makers. Only KATO's general-purpose decoders also work in other makers' cars. The friendly decoders listed by Hobby Center KATO, KATO's own shop:
| Decoder | Use |
|---|---|
| EM13 | Motor-car decoder (動力車用) |
| FL12 | Cab-car decoder for headlights and tail lights (先頭車用) |
| FL12N | Cab-car decoder with dimming (減光機能付) |
| FR11 | Interior-light decoder (室内灯用) |
On KATO product pages DCC Friendly appears as a numbered feature line (for example "⑩DCCフレンドリー" on the N700S page). Which decoder fits a given train is on that train's page or in its instructions.
Can I use Unitrack with DCC?
Yes. KATO USA's FAQ says Unitrack can carry 12 V x 3 A and works with DCC. Unitrack turnouts use a bi-polar solenoid drive, so a stationary decoder that supports it is needed; KATO USA passes on Digitrax's recommendation of the DS52 or DS51K1. On analog DC, by contrast, TOMIX's FAQ notes that one track normally carries one train.
What if I have TOMIX trains?
TOMIX does not support DCC, so TOMIX trains run on its analog TCS power units (see power units). TOMIX also warns that a controller able to output more than DC 12 V may damage TOMIX motors and boards if turned up too far. Any conversion of a TOMIX car to DCC is outside what TOMIX supports.
Common questions
Does TOMIX support DCC?
No. TOMYTEC's FAQ states that TOMIX products do not support the DCC system.
What does "DCC Friendly" mean on a KATO train?
KATO's FAQ says a DCC Friendly car takes a decoder in one step, with no soldering or other modification. KATO makes separate friendly decoders for the motor car, the cab car's lights and the interior lights, and says DCC Friendly cannot be used in cars made by other makers.
Can I use KATO Unitrack with DCC?
Yes, according to KATO USA: Unitrack can carry 12 V x 3 A and works with DCC. Unitrack turnouts use a bi-polar solenoid, so the stationary decoder has to support that; KATO USA passes on Digitrax's recommendation of the DS52 or DS51K1.
Which DCC system does KATO recommend for a first set?
KATO's FAQ recommends its D103 DCC basic set for a first DCC system and says DCC follows the international NMRA standard.
Related
Sources: KATO FAQ: DCC Friendly, KATO FAQ: DCC, Hobby Center KATO: DCC, KATO USA FAQ, KATO N700S, TOMYTEC FAQ. Checked 2026-10-11. Prices are not shown.