Home / Guides / KATO Unitrack

KATO Unitrack Guide

Unitrack is KATO's N gauge track with a built-in plastic roadbed. This page lists the basic sets, the expansion sets that add to them, and the main track pieces by product number, as described on KATO's official Unitrack site (2026-10-11). Prices are not shown.

Quick answer. Start with an oval: the M1 set (20-852), the concrete-tie M1-PC (20-854) or any KATO starter set, which uses the same oval. Then add V sets: V5 or V6 for double track, V1-V4 for sidings and stations, V2 for a viaduct. M1 plus V1 equals M2 (20-853).

The M1 oval measures 1337 x 677 mm, about one tatami mat in KATO's words. Unitrack's standard curve is R315; KATO sells curves from R117 to R718, and all its turnouts are electric. To join TOMIX or other roadbed track, KATO sells the joint track 20-045. Space needed for bigger plans: N scale layout sizes.

What is KATO Unitrack?

Unitrack is KATO's N gauge track with a plastic roadbed, joined with replaceable Unijoiners and powered at DC 12 V. KATO launched it in 1980.

What it isKATO's assembled track with a plastic roadbed (道床付き組立式線路), sold under the name Unitrack source
PowerDC 12 V, two-rail source
Length standardAll track lengths are based on the 248 mm straight source
Double-track spacing33 mm source
Rail joinersUnijoiner (ユニジョイナー), replaceable source
Which trains run on itKATO states that N gauge trains from KATO and other makers worldwide can run on Unitrack source
Basic radiusR315 is described as the basic curve radius, used in the starter sets and M sets source
Track in starter setsKATO says the track and power pack are common to its starter sets, with different trains chosen for each set source
Launched1980 (KATO's company history) source
Rail heightKATO USA: N Unitrack is code 80 (HO Unitrack is code 83) source
Curve rangeR117 to R718 (R117-R183 are Unitrack Compact curves for trams and small cars) source
Sold in the USKATO USA sells Unitrack under the same 20- numbers with English names (e.g. 20-852 "M1 Basic Oval Track Set"); the V1-V6 sets come in bilingual packaging source

Because everything is based on the 248 mm straight, shorter pieces are fractions of it: 124 mm is half and 62 mm is a quarter. The curve radii used for double track are 33 mm apart (for example R282, R315 and R348 in the V5, starter and V6 ovals).

Which Unitrack set should I start with?

An M set if you already have a train (or want to run another maker's N gauge train), a starter set if you want KATO's train and track in one box. KATO suggests the M1 or M2 master set for running other makers' N gauge trains too.

These sets contain track and a power pack but no train. KATO's 20 starter sets that name their track as "M1 equivalent" or "M1-PC equivalent" have the same oval; see KATO starter sets.

NumberSetWhat it isContents (as listed by KATO)
20-852M1 Basic Oval Set (Master 1) with power pack
Oval with R315 curves, the same oval as the starter sets. No train included.Power Pack Standard SX x1, AC adapter x1, quick-start guide, plan-variation guide, 248 mm straight x4, 124 mm straight x1, 124 mm rerailer track x1, 62 mm straight x1 and more
20-854M1-PC Basic Oval Set (concrete ties)
Same R315 oval as M1, built from track with concrete (PC) ties. No train included.Power Pack Standard SX x1, AC adapter x1, quick-start guide, plan-variation guide, PC 248 mm straight x4, PC 124 mm straight x1, 124 mm rerailer track x1 and more
20-853M2 Basic Oval Set with Passing Siding (Master 2)
R315 oval with turnouts for a passing siding. KATO: M1 plus the V1 set is equivalent to M2. The island platform set 23-170 (sold separately) fits between the tracks.Power Pack Standard SX x1, AC adapter x1, quick-start guide, plan-variation guide, rerailer (with Unijoiner remover) x1, 248 mm straight x10, 62 mm straight x1 and more

KATO's list ends with "and more" (など); the curves are not counted in the summary. For the starter-set version of this oval KATO's 10-001 diagram lists four 248 mm straights, one 124 mm and one 62 mm straight, eight R315-45° curves, a 62 mm feeder track, a 124 mm rerailer track and a rerailer.

Expansion sets (V and CV series)

KATO designs the V sets to be added to a starter set or the M1 set, each around one theme.

Single-track extension sets (V1-V6)

NumberSetPurposeMain contents (as listed by KATO)
20-860V1
Island platform passing siding set (electric turnouts)
Passing siding for a station with an island platform, using No. 6 electric turnouts248 mm straight x6, 64 mm straight x2, R718-15° curve x2, No. 6 electric turnout left x1 and right x1, turnout switch x2
20-861V2
Viaduct crossing set
Grade-separated crossing with elevated R315 curves and a single-track truss bridge248 mm straight x4, single-track viaduct straight 248 mm x4 and 124 mm x2, single-track viaduct curve R315-45° x8, single-track truss bridge (vermilion) x1, gradual incline pier set x1
20-862V3
Yard siding set (electric turnouts)
Sidings branching from the main line, e.g. a yard or depot248 mm straight x6, 186 mm straight x2, 64 mm straight x2, bumper track A 62 mm x3, R718-15° curve x3, No. 6 electric turnout left x2 and right x1, and more
20-863V4
Passing loop set for side platforms (electric turnouts)
Passing loop on single track, using small No. 4 electric turnouts248 mm straight x4, 62 mm straight x2, R481-15° curve x2, No. 4 electric turnout left and right x1 each, No. 4 turnout auxiliary track 60 mm left and right x2 each, and more
20-864V5
Inner oval set for double track
Adds a second track inside the basic oval (M1)248 mm straight x4, 124 mm straight x1, 124 mm level-crossing track x1, 62 mm straight x1, 62 mm feeder track x1, R282-45° curve x8, rerailer (with Unijoiner remover)
20-865V6
Outer oval set for double track
Adds a second track outside the basic oval (M1)248 mm straight x4, 124 mm straight x1, 124 mm level-crossing track x1, 62 mm straight x1, 62 mm feeder track x1, R348-45° curve x8, rerailer (with Unijoiner remover)

Double-track sets (V11-V17)

NumberSetPurposeMain contents (as listed by KATO)
20-870V11
Double-track set
The basic double-track set, concrete (PC) tiesDouble-track straight 248 mm x7, 124 mm x1, 62 mm x1, double-track feeder x1, double-track curve R414/381 mm 45° x8, and more
20-871V12
Double-track viaduct crossing set
Double-track grade-separated crossing; combine with V11 or V13Double-track straight 186 mm x2, 124 mm x2, 62 mm x1, double-track viaduct straight (PC) 248 mm x6 and 186 mm x1, and more
20-872V13
Double-track viaduct basic set
Basic double-track viaduct, slab trackDouble-track viaduct straight (slab) 248 mm x8, double-track viaduct curve (slab) R414/381 mm 45° x6, double-track viaduct approach (slab) R414/381 mm left x2, and more
20-873V14
Inner double-track set
Inside V11 to make four tracksDouble-track straight 248 mm x7, 124 mm x1, 62 mm x1, double-track feeder x1, double-track curve R315/282 mm 45° x8, and more
20-876V16
Outer double-track set
Outside V11 to make four tracksDouble-track straight 248 mm x7, 124 mm x1, 62 mm x1, double-track feeder x1, double-track curve R480/447 mm 45° x8, and more
20-877V17
Double-track slab track set
Slab-track plan as seen on newer lines, underground sections and some Shinkansen sectionsDouble-track slab straight 248 mm x4 and 124 mm x4, double-track slab feeder 62 mm x1, double-track slab straight 62 mm x1, and more

Unitrack Compact sets (CV1-CV3)

NumberSetPurposeMain contents (as listed by KATO)
20-890CV1
Unitrack Compact basic oval set
Small oval with R150 curves in 325 x 573 mm. No train or power pack included.R150-45° x8, straight S124 x3, straight S62 x1, feeder S62F x1, rerailer
20-891CV2
Unitrack Compact passing loop set (electric turnouts)
Adds a passing loop to CV1Electric turnout R150 45° left and right x1 each, R150 45° curve x2, turnout switch x2
20-892CV3
Oval with crossing (S)
Oval with R183 curves and a 90° crossing; with CV1 it makes a figure-8Straight S248 x3, S124 x1, rerailer track S124C x1, S62 x1, feeder S62F x1, S45 x2, R183-45° curve x8, 90° crossing X90 x1, and more

Source: KATO Unitrack site, V track set series. KATO notes that Unitrack Compact (R150, R183) is not suitable for regular N gauge trains; it is meant for trams and the small Pocket Line cars.

Which set for which plan

I want to...Add to the M1 / starter oval
Run two trains on separate loopsV5 (inside, R282) or V6 (outside, R348)
Add a station with a passing sidingV1 (island platform) or V4 (side platforms on single track)
Add a yard or depot sidingV3
Add a bridge and a crossing at two levelsV2
Build a double-track main line from the startV11 (concrete ties, R414/381), with V14 or V16 for four tracks

The "inside" and "outside" positions and the radii are KATO's own descriptions of V5 and V6. KATO's double-track starter sets include two power packs so that the inner and outer tracks are controlled separately.

Straight track

NumberNameTrackKATO's note
20-040S62Straight 62 mm (4 pcs)A quarter of the 248 mm standard; the shortest regular straight
20-020S124Straight 124 mm (4 pcs)Half of the 248 mm standard
20-010S186Straight 186 mm (4 pcs)KATO: most KATO N gauge cars fit on it, so it also works for display
20-000S248Straight 248 mm (4 pcs)The standard length; the longest track in the M1 set and the starter sets
20-000-LS248Straight 248 mm (10 pcs)10-piece pack
20-041S62FFeeder track 62 mmCarries power from the power pack to the track; needed to run trains
20-007S248PCConcrete-tie straight 248 mm (4 pcs)Concrete (PC) tie version
20-028S124PCConcrete-tie straight 124 mm (4 pcs)Concrete (PC) tie version
20-054S62PCConcrete-tie straight 62 mm (4 pcs)Concrete (PC) tie version
20-055S62FPCConcrete-tie feeder track 62 mmConcrete (PC) tie version

Source: KATO Unitrack site, straight track.

What curve radii does Unitrack have?

R117 to R718. The everyday curves are R216 to R381; R718 and R481 are the diverging curves used with turnouts, and R117 to R183 are Unitrack Compact curves for trams and small cars only.

NumberCurvePieces for a full circleKATO's note
20-170R216-458
20-100R249-458
20-110R282-458KATO: most conventional (non-Shinkansen) trains can pass
20-120R315-458KATO: the basic radius; almost all trains can pass; used in starter sets and M sets
20-124R315-45PC8Concrete-tie version of R315-45 (4 pcs per pack)
20-132R348-458
20-130R348-3012
20-140R381-3012KATO suggests it for running Shinkansen at speed
20-171R216-1524
20-101R249-1524
20-111R282-1524
20-121R315-1524One third of the R315-45 angle
20-150R718-15-Used with No. 6 turnouts
20-160R481-15-Used with No. 4 turnouts; two together change double-track spacing from 33 mm to 66 mm
20-172R183 (Compact)8Unitrack Compact: not suitable for regular N gauge trains; for trams and Pocket Line
20-174R150 (Compact)8Unitrack Compact: not suitable for regular N gauge trains; for trams and Pocket Line
20-176R117 (Compact)-KATO: the smallest Unitrack curve; for trams and Pocket Line only

The name gives the radius in millimetres and the angle in degrees: R315-45 is a 315 mm radius, 45° piece, so eight make a circle. The minimum radius of each train is on its product page; our set pages show it where KATO states it (for example R315 for the N700S, E5 and E7 sets).

Source: KATO Unitrack site, curved track. KATO: where a train's page gives no radius, R249 is its minimum curve radius (Unitrack Compact excluded).

What radius do N scale Shinkansen need?

R315 for most current KATO Shinkansen in our database: KATO gives "minimum curve radius R315" on the product pages of 14 current product numbers, including N700S 10-1697S, E5 10-1969 and E7 10-1980. The E6 "Komachi" Z6 sets () state R282.

That is the smallest curve the train can pass, not the curve KATO recommends for fast running: for Shinkansen at speed KATO suggests R381-30 (20-140). The double-track sets V11 (R414/381) and V16 (R480/447) use radii above R315. TOMIX does not publish a minimum radius for its Shinkansen on the pages we checked.

Which turnouts does Unitrack use?

All Unitrack turnouts are electric. The No. 6 is KATO's general-purpose turnout; the No. 4 is the compact one. Remote switching needs the point switch 24-840.

NumberItemKATO's description
20-220 / 20-221No. 4 electric turnout (L / R)Compact turnout. Power routing can be switched between selective and non-selective.
20-202 / 20-203No. 6 electric turnout (L / R)The general-purpose turnout, with a large diverging radius for higher speed. Used in V1 and V3.
20-222No. 2 electric wye turnoutCan also be used as a spring turnout.
20-230 / 20-231Double-track single crossover No. 4 (L / R)248 mm long, with a built-in point machine.
20-210Double crossoverCrossovers in both directions between two tracks.
20-300 / 20-30115° crossing (L / R)No special wiring needed for the crossing itself.
20-32090° crossingNo special wiring needed for the crossing itself.
24-840Point switchNeeded to operate electric turnouts remotely; fed with DC 12 V.
24-842Point adapterFor using Unitrack point switches with a power pack from another maker.

Source: KATO Unitrack site, turnouts and crossings.

Can Unitrack connect to TOMIX or other track?

Yes, through KATO's joint track 20-045, which KATO describes as connecting Unitrack to fixed track or to other makers' roadbed track up to 19 mm wide. TOMIX gives its Fine Track roadbed as 18.5 mm wide and sells its own joint rail S35-J(F) (1529). The two systems still use different lengths, radii and double-track spacing (33 mm vs 37 mm); see KATO vs TOMIX.

NumberItemKATO's description
20-045Joint track 62 mmConnects Unitrack to fixed track (flexible track on cork) or to another maker's roadbed track up to 19 mm wide. source
20-041Feeder track 62 mmKATO: essential for running trains; it carries power from the power pack to the track. source
20-043Double-track feeder setFeeds both tracks of a double line. source
24-818Terminal UnijoinerAdds a feed point at any rail joint. source
20-030Straight 64 mm (S64)Used with No. 6 turnouts for 66 mm track spacing. source
20-050Slide track 78-108 mmAdjustable length for closing gaps. source

Which power pack works with Unitrack?

KATO's own: the Power Pack Standard SX (1.2 A) is in the M sets and starter sets. KATO's FAQ says power packs and track basically only work as a same-maker pair, while trains from other makers run without problems. Voltage outside Japan and the other controllers: KATO power pack guide.

NumberItemKATO's specification
22-018BKPower Pack Standard SX (AC adapter sold separately)Rated current 1.2 A. Use with the N or HO AC adapter sold separately.
22-082N AC adapterInput AC 100-240 V, 47-63 Hz (type A plug); output DC 13.5 V 2.2 A. KATO: change the plug part when using it outside Japan.
22-083HO AC adapterInput AC 100-240 V, 47-63 Hz (type A plug); output DC 17 V 2.1 A.
22-017Power Pack Hyper DXHigher-output PWM power pack than the Standard SX.
22-019Smart Controller (AC adapter sold separately)Runs trains from a smartphone app over Bluetooth. Output DC 0-12 V (with N adapter) / 0-16 V (with HO adapter), 2.0 A.

The starter sets come with a "starter-set AC adapter". KATO does not state its input voltage on the pages we checked, so we show it as Not confirmed. The separately sold N AC adapter 22-082 is the item with a published 100-240 V input rating.

Source: KATO Unitrack site, control equipment.

Is Unitrack sold in the US?

Yes. KATO USA, KATO's US subsidiary, sells Unitrack under the same 20- product numbers with English names (for example 20-852 "M1 Basic Oval Track Set") and the V1-V6 sets in bilingual packaging. More on the differences: KATO USA vs KATO Japan.

Common questions

What is the standard radius of KATO Unitrack?

R315 (315 mm). KATO calls it the basic curve radius that almost all trains can pass, and it is the curve used in the starter sets and the M1 and M2 basic sets. Eight R315-45° pieces make a circle.

Can KATO Unitrack connect to TOMIX Fine Track?

With an adapter piece. KATO's joint track 20-045 (62 mm) connects Unitrack to other makers' roadbed track up to 19 mm wide; TOMIX sells its own joint rail S35-J(F) (1529) for the other side. Fine Track's roadbed is 18.5 mm wide according to TOMIX.

What radius do N scale Shinkansen need on Unitrack?

For the current KATO Shinkansen sets in our database that state it, R315 (for example the N700S, E5 and E7), and R282 for the E6 Z6 sets. KATO suggests the R381 curve for running Shinkansen at speed.

Are KATO Unitrack turnouts electric?

Yes. Every turnout on KATO's Unitrack turnout page is electric (No. 4, No. 6, a No. 2 wye and the double-track crossovers). To switch them remotely you need the separately sold point switch 24-840.

Related

All values are from KATO's official Unitrack site, product pages, KATO's company history and KATO USA's FAQ, checked 2026-10-11. Rail Set Atlas is not affiliated with KATO and has not tested the track.