Home / Guides / Couplers

N Scale Couplers: KATO, TOMIX and Compatibility

Which couplers (連結器, カプラー) Japanese N gauge trains use, the replacement parts each maker sells, and what the makers say about coupling to other brands. Taken from KATO's and TOMIX's official pages, checked 2026-10-11. We have not tested any combination.

Quick answer. KATO and TOMIX cars are generally not made to couple to each other. TOMIX says its TN couplers are not compatible with other makers and that coupling with other makers' cars is in principle not possible, except some freight cars. Arnold couplers are the shared standard: TOMIX calls them a worldwide standard, and KATO says that its KiHa 58 with body-mount couplers needs Arnold or knuckle couplers to run with other classes.

Which coupler types are there?

Three families appear on both makers' pages: Arnold couplers, the maker's own realistic couplers (KATO Coupler, TOMIX TN), and special couplers for Shinkansen.

TypeKATOTOMIX
Arnold (アーノルドカプラー)Standard on some cars, e.g. the ヨ5000 brake van; the parts set 28-235 adds Arnold or knuckle couplers to the body-mount KiHa 58"Worldwide standard" coupler; the adapter JC19 converts tight-lock automatic TN cars to Arnold
Maker's own realistic couplerKATO Coupler N (knuckle), KATO close couplers (tight-lock), KATO Coupler N JP (with jumper hoses), magnetic knuckle couplerTN coupler: tight-lock, tight-lock automatic, automatic and dual-head types; body-mount (SP) or bogie-mount
ShinkansenNot collected on this site yetConductive couplers (通電カプラー) for good current flow along long trains
With other makersNo statement found on the KATO pages we could openTN: not compatible with other makers; coupling with other makers' cars in principle not possible, except some freight cars

Sources: KATO coupler page, KATO beginner site, Hobby Center KATO 28-235, TOMYTEC FAQ, TOMIX JC19.

What couplers do KATO trains use?

Different ones by car type. KATO's beginner site says its N gauge trains use different couplers depending on the kind of car, and explains how to use each: Arnold and KATO couplers couple when pushed gently together on straight track and separate by lifting one car; KATO close couplers couple when pushed together and separate when pulled apart on straight track. Some cars mix types; KATO's クモヤ90, for example, has a body-mount close coupler at one end and a bogie-mounted Arnold coupler at the other.

KATO's optional N couplers (20 pieces, enough for 10 cars, per pack):

NumberCouplerUse (KATO)
11-702 / 11-707KATO Coupler N (black / grey)Knuckle-type (自連形) coupler for coaches and diesel cars
11-703 / 11-704KATO Coupler, close-coupler type A (black / grey)Tight-lock (密連形) coupler for electric multiple units
11-705 / 11-706KATO Coupler, close-coupler type B (black / grey)Tight-lock coupler for EMUs
11-721 / 11-722KATO Coupler N JP A / B (black)Coupler with jumper hoses; KATO: 11-721 does not fit 2-axle wagons
11-730 / 11-731KATO close coupler #2 for newer EMUs (long / short)Replaces the older hooked body-mount close coupler

KATO says most of these fit without modifying the car, with some exceptions and cars they do not fit. The magnetic knuckle coupler has a release pin, so cars uncouple automatically when stopped over the uncoupler track 20-032.

What is a TOMIX TN coupler?

TOMIX's own coupler, shaped like the real thing, that is not compatible with other makers. TOMIX gives three main coupler types on its cars: the Arnold coupler (worldwide standard), the TN coupler, and the conductive coupler for Shinkansen. TN couplers come in tight-lock (密連形), tight-lock automatic (密自連形), automatic (自連形) and dual-head (双頭形) types, mounted on the body or the bogie, so TOMIX says to check the car's package or instructions for the matching TN coupler. Replacement coupler parts carry JC numbers.

  • Arnold to TN: converting cuts the coupler pocket, so TOMIX says the car cannot go back to Arnold.
  • Mini curves: cars approved for TOMIX's super-mini and mini curves can no longer run on them after a TN conversion.
  • TN to Arnold: the coupler adapter JC19 is for all cars with tight-lock automatic TN couplers.

Can KATO and TOMIX cars be coupled together?

Not as a rule. TOMIX states that coupling with other makers' cars is in principle not possible, except some freight cars, and that TN couplers are not compatible with other makers. KATO's statement on this is on an old beginner guide that would not load when we checked, so we do not quote it. Both makers say that other makers' N gauge trains can run on their track, so running a KATO train and a TOMIX train on the same layout is a different question from coupling them; see KATO vs TOMIX.

Inside one maker, the safe way to get a full train is to buy the add-on sets made for the basic set you have. Each series page shows which cars are in which box, for example the KATO and TOMIX N700S splits.

What couplers do N scale Shinkansen use?

TOMIX: conductive couplers, which TOMIX says carry current well in long trains. On the TOMIX E5 basic set (98497) TOMIX lists hook-and-U-shaped conductive couplers, and a TN coupler on the cab end of car E514 that couples to an E6. We have not collected the coupler types of KATO's Shinkansen sets; each of our set pages links to KATO's product page.

Common questions

Can KATO and TOMIX cars be coupled together?

Not as a rule. TOMIX's FAQ says coupling TOMIX cars with other makers' cars is in principle not possible, except some freight cars, and that its TN couplers are not compatible with other makers. KATO's pages that we could open do not make a statement about coupling to other makers' cars.

What couplers do KATO trains use?

It depends on the car type. KATO says its N gauge trains use different couplers by type: Arnold couplers, KATO knuckle couplers and KATO close (tight-lock) couplers, some body-mounted. KATO sells four optional families: KATO Coupler N, KATO Coupler N JP, KATO close couplers and magnetic knuckle couplers.

What is a TOMIX TN coupler?

TOMIX's own coupler, shaped like the real one. TOMIX sells tight-lock, tight-lock automatic, automatic and dual-head TN couplers, in body-mount and bogie-mount versions, and says to check the car's package or instructions for the right one. TN couplers are not compatible with other makers.

What couplers do N scale Shinkansen use?

TOMIX says its Shinkansen use conductive couplers, which carry current well along long trains; on the E5 basic set the cab end that couples to an E6 has a TN coupler. We have not collected the coupler types of KATO's Shinkansen sets.

Related

Sources: KATO: coupler parts, KATO beginner site: coupling, Hobby Center KATO 28-235, KATO FAQ: magnetic knuckle coupler, KATO クモヤ90, KATO ヨ5000, TOMYTEC FAQ, TOMIX JC19, TOMIX 98497. Checked 2026-10-11. Prices are not shown.