Home / Guides / N Scale Layout Size

N Scale Layout Size: KATO and TOMIX Plans

The outside dimensions that KATO and TOMIX give for their N gauge track plans, from the basic oval to double track and viaducts. Inches are converted from the makers' millimetres. Checked 2026-10-11.

Quick answer. A basic N gauge oval needs about one tatami mat. KATO's starter-set oval is 1337 x 677 mm (52.6 x 26.7 in); TOMIX's Rail Pattern A oval is 1120 x 560 mm (44.1 x 22.0 in). Adding a passing siding, double track or a viaduct makes the TOMIX plans 1.4 to 2.2 m long.

How big are the makers' track plans?

Every plan with a size published by the maker. The table is the outside size of the track; leave room around it for reaching in.

MakerPlanSizeNote
KATOStarter set / M1 oval (R315)1337 x 677 mm (52.6 x 26.7 in)KATO: fits in about one tatami mat source
KATOCV1 compact oval (R150, trams and small cars)325 x 573 mm (12.8 x 22.6 in)KATO: A2 paper size or smaller source
KATOExample layout on KATO's beginner site (plan not named)2519 x 1086 mm (99.2 x 42.8 in)Photo caption only source
TOMIXRail Pattern A oval (C280), as in Basic Set SD1120 x 560 mm (44.1 x 22.0 in)TOMIX FAQ: about one tatami mat source
TOMIXPattern A + B (passing siding), as in My Plan NR560 x 1680 mm (22.0 x 66.1 in)2021 beginner pamphlet source
TOMIXPattern C (viaduct crossing, 91027)613 x 1422 mm (24.1 x 56.0 in)2021 beginner pamphlet source
TOMIXPattern D (double track, 91028)634 x 1614 mm (25.0 x 63.5 in)2021 beginner pamphlet source
TOMIXPattern A + B + D, as in My Plan DT634 x 1754 mm (25.0 x 69.1 in)2021 beginner pamphlet source
TOMIXPattern A + B + C, as in My Plan DX814 x 2158 mm (32.0 x 85.0 in)2021 beginner pamphlet source

TOMIX's sizes other than Pattern A are from its beginner pamphlet (May 2021 edition), an older edition whose prices are out of date. KATO does not state outside sizes for its M2 set or the V-set plans in the page text we checked.

How big is the KATO starter set oval?

1337 x 677 mm. KATO's beginner site calls it a simple oval that fits in about one tatami mat, and the same size applies to the M1 track set. The oval uses R315 curves, the curve that KATO says almost all trains can pass, including the current KATO Shinkansen in our database (see radius by train).

How do KATO plans grow?

With V sets added to the oval. KATO's beginner site shows these steps (KATO gives no outside size for them):

CombinationAddsKATO says
M1 + V1Station with an island platform and passing sidingUp to two trains
M1 + V2Viaduct and grade-separated crossingUses curves that Shinkansen can run on
M1 + V3Depot sidingsUp to three trains
M1 + V11Double trackTwo trains at the same time
V11 + V1 + V2 + V3KATO's full example plan built from the sets above

Contents of each V set and the radii they use: KATO Unitrack guide.

How big is the TOMIX basic oval?

1120 x 560 mm. TOMIX's FAQ says you can start with an oval layout (Rail Pattern A) if you have about one tatami mat of space. It uses C280 curves, TOMIX's base radius, and is the oval in TOMIX's Basic Set SD and the My Plan LT set. TOMIX's extension sets B (passing siding), C (viaduct crossing) and D (double track) add to it; TOMIX states they cannot be used on their own.

What is the smallest N scale layout?

One for small cars only. KATO's CV1 Unitrack Compact oval (R150) is 325 x 573 mm, under A2 paper size, and KATO says Unitrack Compact is not suitable for regular N gauge trains. TOMIX's super-mini curve (R103) fits a full circle inside B4 paper size, and only the cars on TOMIX's list can run on its super-mini and mini curves, in trains of four cars or fewer.

Can a Shinkansen run on a starter oval?

The KATO Shinkansen sets in our database that state a minimum radius need R315 (the E6 Z6 sets R282), which is the radius of the KATO starter oval; KATO suggests R381 for running them at speed and says its V2 viaduct set uses curves that Shinkansen can run on. TOMIX does not publish a minimum radius for its Shinkansen on the pages we checked.

Common questions

How much space does an N scale layout need?

The makers' starter ovals need about one tatami mat: KATO gives its starter-set oval as 1337 x 677 mm (52.6 x 26.7 in) and TOMIX its Rail Pattern A oval as 1120 x 560 mm (44.1 x 22.0 in). A TOMIX oval with a passing siding (Pattern A + B) is 560 x 1680 mm in TOMIX's 2021 pamphlet.

How big is the KATO N scale starter set oval?

1337 x 677 mm (about 52.6 x 26.7 inches). KATO says it fits on about one tatami mat. It uses R315 curves and is the same oval as the M1 track set.

What is the smallest N scale layout from KATO or TOMIX?

For small cars only. KATO's CV1 compact oval with R150 curves is 325 x 573 mm, and TOMIX says its super-mini R103 curve makes a full circle within B4 paper size. Both are meant for trams or listed small cars, not regular trains.

Related

Sources: KATO beginner site: plans, KATO beginner site, KATO Unitrack: V sets, TOMYTEC FAQ, TOMIX beginner pamphlet (PDF, May 2021), TOMIX 1111 super-mini curve. Checked 2026-10-11.