Which KATO power packs are there?
Four controllers are on KATO's Unitrack control-equipment page. The Standard SX is the entry model; the Hyper DX and the Smart Controller have a higher rated current (2 A).
| Number | Controller | Output (KATO) | Power supply | Outside Japan |
|---|---|---|---|---|
| 22-018BK | Power Pack Standard SX source | Rated 1.2 A | Sold without adapter; use the N (22-082) or HO (22-083) AC adapter. Included in the M sets and starter sets. | Depends on the adapter (see below) |
| 22-017 | Power Pack Hyper DX source | PWM, DC 0-14.5 V, 2 A | Own AC adapter, plug for Japan only | KATO: plug for use in Japan only |
| 22-019 | Smart Controller (Bluetooth, smartphone app) source | DC 0-12 V (N adapter) / 0-16 V (HO adapter), 2.0 A | Sold without adapter; N or HO AC adapter | Depends on the adapter |
| 22-053 | EC-1 one-handle cab controller source | Not stated on KATO's page | Not confirmed | Not confirmed |
KATO's power pack FAQ gives the output to the track as DC 0-12 V for most N gauge trains (HO sometimes uses 16 V). Power Pack Standard S is not on KATO's current control-equipment page.
Can I use a KATO power pack outside Japan?
Yes with the 22-082 adapter, whose input is rated 100-240 V; not confirmed with the adapter that comes in starter sets. KATO publishes these ratings for its two separately sold AC adapters:
| Number | Adapter | KATO's specification |
|---|---|---|
| 22-082 | N AC adapter | Input AC 100-240 V, 47-63 Hz (type A plug); output DC 13.5 V 2.2 A. KATO: change the plug part when using it outside Japan. |
| 22-083 | HO AC adapter | Input AC 100-240 V, 47-63 Hz (type A plug); output DC 17 V 2.1 A. |
- Starter-set adapter: the product pages name it but do not give the input voltage. For 10-004 and 10-025 KATO describes the power supply as "global specification". Check the label on the adapter before plugging it in.
- Hyper DX: KATO states its adapter plug is for use in Japan only.
- Upgrade: KATO says the 22-082 adapter also raises the output of the starter set's Standard SX.
- In the US: KATO USA sells the pack as 22-018BK-1 "Power Pack SX for both N & HO" (rated 1.2 A) but does not state the adapter's mains voltage on its page.
Can I mix KATO and TOMIX power with other track?
The makers answer differently. KATO's FAQ: "power packs and track basically only work in combination from the same maker", while other makers' trains run without problems. TOMIX's FAQ: a TOMIX power unit can run other makers' trains and another maker's controller can run TOMIX trains, but because TOMIX units are set at 12 V, a controller that can output more than DC 12 V may damage TOMIX motors and circuit boards if turned up too far. For KATO electric turnouts on another maker's power pack, KATO sells the point adapter 24-842.
What does TOMIX use instead?
TOMIX's controllers are TCS power units, all rated at 1 A or 1.2 A and 0-12 V. TOMIX's FAQ says adapter-type power units can be used in 100-240 V countries, though a plug adapter may be needed; each unit below is adapter-type according to its product page. The unit in TOMIX's Basic Set SD is named PU-N600.
| Number | Unit | Output (TOMIX) | Power supply |
|---|---|---|---|
| 5507 | TCS Power Unit N-600 source | DC 1 A, 0-12 V | Adapter type |
| 5506 | TCS Power Unit N-1001-CL source | DC 1.2 A, 0-12 V, constant lighting | Adapter type |
| 5517 | TCS Power Unit N-DU101-CL source | DC 1.2 A, 0-12 V, pulse control, constant lighting | DC 12 V AC adapter |
| 5518 | TCS Power Unit N-DU204-CL source | 1.2 A, two running outputs, constant lighting | AC adapter |
| 5514-5516 | TCS Wireless Power Unit N-WL10-CL source | DC 1.2 A, 0-12 V, constant lighting | DC 12 V AC adapter |
TOMIX also notes that cars with constant lighting stay lit when stopped only on a unit with the CL (constant lighting) function, and that one track carries one train in normal analog running. For running several trains on one track, see DCC (KATO only).
What else is needed to run a train?
A feeder track that connects the power pack to the rails. KATO calls its 62 mm feeder track (20-041) essential for running trains; it is in every starter set and M set. TOMIX's equivalent is the D.C. Feeder N (5534), which clips into the rail. See the Unitrack guide.
Common questions
What power pack comes with a KATO starter set?
The Power Pack Standard SX (rated 1.2 A) with a starter-set AC adapter. Recent runs have the power pack in black. The same pack is in the M1, M1-PC and M2 track sets.
Can I use a KATO power pack outside Japan?
With the right adapter. The separately sold N AC adapter 22-082 is rated AC 100-240 V, 47-63 Hz, and KATO says to change the plug part when using it outside Japan. KATO does not state the input voltage of the starter-set adapter on the pages we checked, and the Hyper DX adapter has a plug for Japan only.
Can I use a KATO power pack with TOMIX track?
KATO's FAQ says a power pack and track basically only work as a same-maker pair, while trains from other makers run without problems. TOMIX's FAQ says a TOMIX controller can run other makers' trains and the other way round, and warns that a controller set above DC 12 V can damage TOMIX cars.
Is the KATO Power Pack Standard SX sold in the US?
Yes. KATO USA sells it as 22-018BK-1 "Power Pack SX for both N & HO", rated 1.2 A. Its page does not state a US mains voltage for the adapter.
Related
Sources: KATO Unitrack: control equipment, KATO Hyper DX, KATO FAQ: power packs, KATO USA: Power Pack SX, TOMYTEC FAQ and the TOMIX product pages linked in the table. Checked 2026-10-11. We have not tested any controller, and nothing here is electrical safety advice; follow the label on your adapter.